基于特征模型和跟蹤微分器的主動磁軸承自適應控制方法
關鍵詞:特征模型;跟蹤微分器;主動磁軸承;自適應控制
中圖分類號:TP273
DOI:10.3969/j.issn.1004-132X.2025.06.024 開放科學(資源服務)標識碼(OSID):
Adaptive Control Method of AMB Based on Characteristic Model and Tracking Differentiator
JI Li CHEN Meihao* Information Engineering College,Hangzhou Dianzi University,Hangzhou,311305
Abstract: In order to improve the robustness of AMB systems in the face of noise interference and external shocks,an adaptive control method was proposed based on characteristic model and tracking differentiator. The characteristic model parameters of AMB systems were identified online through the input and output data of the control system,and the golden section adaptive controler was designed based on the identified characteristic model. The range of characteristic parameters of AMB systems was derived,the projection gradient method with nonlinear saturation function was used to identify the parameters of the systems,and the tracking differentiator was used to track and filter the measurement data of the control system,which further improved the robustness of AMB systems in the face of noise interference. The proposed control method was tested on the test platform of high-speed magnetic levitation motor. The experimental results show that the tracking diferentiator may effectively filter out the interference of external noises on the measured data.Compared with the commonly used incomplete differential PID control method,the proposed adaptive control method may effectively improve the control accuracy and robustness of AMB systems,and the vibration peak values of the magnetic suspension rotor are reduced by 51.4% :
Key words: characteristic model; tracking differentiator; active magnetic bearing(AMB); adaptive control
0 引言
主動磁軸承(activemagnetic bearing,AMB)是一種利用可控電磁力使轉子穩定懸浮于設定位置的新型軸承。(剩余8188字)
-
-
- 中國機械工程
- 2025年06期
- 考慮分布和傳遞模型的機械系統可...
- 中間相炭微球?qū)Χ鄬逾F焊金剛石砂...
- 固結與游離磨粒協同作用硬脆材料...
- RV減速器服役工況加速載荷譜編...
- 基于全息下三角矩陣變換對比的運...
- 基于關節扭矩平衡的機器人末端負...
- 一種新型負壓式爬壁機器人吸附特...
- 風電設備情境知識圖譜構建技術研...
- 基于有限元模擬的螺栓退刀槽滾壓...
- 輪轂毛刺機器人打磨刀路規劃與工...
- 基于局部線性嵌人的制造過程多重...
- 基于多元動因驅動的中藥制藥車間...
- 基于多源信息融合和集成學習的薄...
- 基于拆卸信息提取的多零件堆疊結...
- 考慮同軸度的汽車發動機曲軸孔鏜...
- 基于缸徑與流量匹配的高空作業平...
- 硬質合金刀具增材制造技術發展趨...
- 固溶處理對鍛/增復合成形TC4...
- 基于混合遺傳蟻群優化隨機森林算...
- 玻纖質量分?jǐn)?shù)對長玻纖增強聚丙烯...
- 復雜形狀零件單點漸進液壓成形厚...
- 帶鋼平整過程中C翹機理及治理策...
- 正壓防護服用供氣背包設計及其數...
- 基于特征模型和跟蹤微分器的主動...
- 挖掘機工作過程動力特性仿真及主...
- 基于混雜模型預測控制的順序?qū)崟r...
- 《面向2035特種加工技術路線...