基于拆卸信息提取的多零件堆疊結構設備動態干涉分析方法

打開文本圖片集

中圖分類號：TH166DOI：10.3969/j.issn.1004-132X.2025.06.014 開放科學（資源服務）標識碼（OSID）：

DIA Method for Multi-part Stacked Structure Devices Based on Disassembly Information Extraction

WANG Yunfan1，2 ZHU Libin1，2 CUI Chuangchuang1'2HUANG Haihongl1，2* 1.School of Mechanical Engineering，Hefei University of Technology，Hefei， 2.Anhui Province Key Laboratory of Low Carbon Recycling Technology and Equipment for Mechanical and Electrical Products，Hefei，

Abstract： Aiming at the problems of low eficiency and accuracy of disassembly interference detection due to the multi-part stacked structure devices，a DIA method was proposed based on DIE to improve the accuracy of disassembly information acquisition and shorten the disassembly time of parts. The disassembly information in the design model was extracted and quantified as a priority matrix through two-stage interference detection involving the boundary box and solid intersection. The dynamically changing disassembly information was accurately extracted by combining the dual coordinate system transformation of the assembly and parts. In order to verify the feasibility and effectiveness of this method， CAD design model experiments were conducted. The priority matrix generated by DIA and traditional interference detection methods were obtained and used as structural constraint information，which were input into the BOA-GA to search for the optimal disassembly sequence. The experimental results demonstrate that the accuracy of the priority matrix generated by DIA is increased by 28.57% compared with the traditional method，and the disassembly time of the optimal sequence is shortened by 3.31% ：

Key words： design for disassembly;disassembly information extraction（DIE）； dynamic interference analysis（DIA）；butterfly-genetic hybrid optimization algorithm（BOA-GA）

0 引言

隨著現代科學技術的飛速發展，設備的技術迭代不斷加速[1]。（剩余16450字）