一種新型負壓式爬壁機器人吸附特性分析
中圖分類號:TP242
DOI:10.3969/j.issn.1004-132X.2025.06.007 開放科學(資源服務)標識碼(OSID):i
Analysis of Adhesion Characteristics of Novel Negative-pressure Adhesion Wall-climbing Robots
DONG Weiguang1* LIU Aihua2 SONG Yifeng2
1.School of Transportation and Vehicle Engineering,Wuxi University,Wuxi,Jiangsu,214105
2.State Key Laboratory of Robotics,Shenyang Institute of Automation,Chinese Academy of Sciences,Shenyang,110016
Abstract: Addressing the challenge in optimizing the adhesion performance of wall-climbing robots based on negative pressure adhesion method due to the complexity of internal flow fields and difficulties in precise modeling,a flow field modeling method was proposed based on flow rate conservation.According to the structural characteristics of negative pressure adhesion systems of a wal-climbing robot,mathematical models of airflow field in negative pressure adhesion systems were built by combining the laws of thermodynamics and N-S equations using air flow rate as the related factor. Then,key influencing factors of adhesion performance were identified based on the model: sealing ring width,leakage gap height,and centrifugal pump power. The effective adhesion forces were changing with airflow of adhesion systems.Results of the simulation and prototype experiments show that the models constructed herein may accurately reflect the changing rules of adhesion performance,and may provide evidences for the optimization of adhesion performance of wall climbing robots with negative pressure adhesion method. Finally,according to the movement characteristics of the wall-climbing robots,adsorption performance optimization strategy was increasing the rated adsorption force to self gravity ratio while decreasing the effective adsorption force to self gravity ratio.
Key words: wal-climbing robot; negative-pressure adhesion; flow field model; flow analysis
0 引言
壁面爬行機器人(以下簡稱爬壁機器人)能夠代替操作人員在各種不同傾角的壁面上工作,達到提高工作效率、保護生命安全以及節約成本的目的[1-2],其應用場景包括船舶外表面除銹與噴涂、建筑物外表面清洗與檢測、油罐表面探傷與噴涂以及風機葉片或水電大壩檢修與維護等[2]。(剩余11540字)
- 考慮分布和傳遞模型的機械系統可...
- 中間相炭微球?qū)Χ鄬逾F焊金剛石砂...
- 固結與游離磨粒協同作用硬脆材料...
- RV減速器服役工況加速載荷譜編...
- 基于全息下三角矩陣變換對比的運...
- 基于關節扭矩平衡的機器人末端負...
- 一種新型負壓式爬壁機器人吸附特...
- 風電設備情境知識圖譜構建技術研...
- 基于有限元模擬的螺栓退刀槽滾壓...
- 輪轂毛刺機器人打磨刀路規劃與工...
- 基于局部線性嵌人的制造過程多重...
- 基于多元動因驅動的中藥制藥車間...
- 基于多源信息融合和集成學習的薄...
- 基于拆卸信息提取的多零件堆疊結...
- 考慮同軸度的汽車發動機曲軸孔鏜...
- 基于缸徑與流量匹配的高空作業平...
- 硬質合金刀具增材制造技術發展趨...
- 固溶處理對鍛/增復合成形TC4...
- 基于混合遺傳蟻群優化隨機森林算...
- 玻纖質量分數對長玻纖增強聚丙烯...
- 復雜形狀零件單點漸進液壓成形厚...
- 帶鋼平整過程中C翹機理及治理策...
- 正壓防護服用供氣背包設計及其數...
- 基于特征模型和跟蹤微分器的主動...
- 挖掘機工作過程動力特性仿真及主...
- 基于混雜模型預測控制的順序?qū)崟r...
- 《面向2035特種加工技術路線...