基于關節扭矩平衡的機器人末端負載建模及辨識
中圖分類號:TP242.2
DOI:10.3969/j.issn.1004-132X.2025.06.006 開放科學(資源服務)標識碼(OSID):
Modeling and Identification of Robot End-payloads Based on Joint Torque Balance
GAO Guanbin1,2ZHAO Siguo1,2LI Yingjie1,2 * 1.Faculty of Mechanical and Electrical Engineering,Kunming University of Science and Technology, Kunming, 2.Yunnan Key Laboratory of Intelligent Control and Application,Kunming,
Abstract: To address the challenges of decoupling center of mass parameters in existing end-payload identification methods and the dificulty of implementation on robots with non-open controllers,a torque-balance-based modeling and identification method was proposed for robot end-payloads. The identifiability conditions of the end-payloads were analyzed under joint torque balance,and identification models for the end-payload mass and center of mass position were established. To further decouple the mass and center of mass parameters,a three-step identification strategy was designed,where the load mass was identified first,followed by the center of mass position in x and y , and finally in z This strategy effectively eliminated the error terms introduced by the projection of joint torques in the identification models. The eficiency of the proposed method was validated through simulation and experiments. Compared with the built-in identification method of a non-open-source six-degree-of-freedom robot,the average error in mass identification is reduced from 0.103kg to 0.032kg ,while the average error in center of mass position identification is decreased from 50.25mm to 4.14mm . Furthermore,compared with dynamics parameter identification,the mass identification error is reduced from 0.179kg to 0.083kg ,and the center of mass position error is reduced from 10.13mm to 4.33mm
Key words: industrial robot;end-payload; torque balance;parameter identification;torque projection
0 引言
隨著裝備制造業對自動化和智能化需求的不斷提高,工業機器人被廣泛應用于裝配、噴涂、焊接、搬運等一系列工業生產活動中[1]。(剩余15901字)
-
-
- 中國機械工程
- 2025年06期
- 考慮分布和傳遞模型的機械系統可...
- 中間相炭微球?qū)Χ鄬逾F焊金剛石砂...
- 固結與游離磨粒協同作用硬脆材料...
- RV減速器服役工況加速載荷譜編...
- 基于全息下三角矩陣變換對比的運...
- 基于關節扭矩平衡的機器人末端負...
- 一種新型負壓式爬壁機器人吸附特...
- 風電設備情境知識圖譜構建技術研...
- 基于有限元模擬的螺栓退刀槽滾壓...
- 輪轂毛刺機器人打磨刀路規劃與工...
- 基于局部線性嵌人的制造過程多重...
- 基于多元?jiǎng)右蝌?qū)動的中藥制藥車間...
- 基于多源信息融合和集成學習的薄...
- 基于拆卸信息提取的多零件堆疊結...
- 考慮同軸度的汽車發動機曲軸孔鏜...
- 基于缸徑與流量匹配的高空作業平...
- 硬質合金刀具增材制造技術發展趨...
- 固溶處理對鍛/增復合成形TC4...
- 基于混合遺傳蟻群優化隨機森林算...
- 玻纖質量分?jǐn)?shù)對長玻纖增強聚丙烯...
- 復雜形狀零件單點漸進液壓成形厚...
- 帶鋼平整過程中C翹機理及治理策...
- 正壓防護服用供氣背包設計及其數...
- 基于特征模型和跟蹤微分器的主動...
- 挖掘機工作過程動力特性仿真及主...
- 基于混雜模型預測控制的順序?qū)崟r(shí)...
- 《面向2035特種加工技術路線...