RV減速器服役工況加速載荷譜編制方法
中圖分類號:TH132.46DOI:10.3969/j.issn.1004-132X.2025.06.004 開放科學(資源服務)標識碼(OSID):
Accelerated Load Spectrum Preparation for RV Reducer Service Conditions
YANG Yu1,2 LI Xiaolei2TAO Yourui1,2 GUO Qiyu12 YE Nan1,2 * 1.State Key Laboratory of Reliability and Inteligence of Electrical Equipment,Hebei University of Technology,Tianjin, 2.School of Mechanical Engineering,Hebei University of Technology,Tianjin,
Abstract: Aiming at the needs of reliability analysis and life prediction of RV reducers for industrial robot joints,a method of compiling accelerated load spectrum for RV reducers was proposed based on service conditions.On-site collection of industrial robot joint torque-time data and data preprocessing,the Markov chain Monte Carlo methods(MCMC) were applied for time-domain reconstruction and service conditions were synthesized as a typical RV reducer reconstruction of the load history. The rainfall counting methods were used for statistical counting,distribution fiting and parameter estimation,to obtain the statistical distribution laws of the mean-amplitude of the load. The mean-amplitude two-dimensional load spectrum obtained by frequency extrapolation were transformed into 8-level one-dimensional program loading spectrum,and accelerated based on the actual applications of RV reducers,which was compiled into a one-dimensional accelerated program loading spectrum of RV reducers,which greatly shortened the fatigue life test cycle.
Key words: industrial robot;RV reducer; load spectra;accelerated life test; fatigue life
0 引言
RV減速器具有結構緊湊、傳動比大、承載能力強、傳動平穩、傳動效率高等優點,被廣泛應用于工業機器人重載關節。(剩余12468字)
-
-
- 中國機械工程
- 2025年06期
- 考慮分布和傳遞模型的機械系統可...
- 中間相炭微球?qū)Χ鄬逾F焊金剛石砂...
- 固結與游離磨粒協同作用硬脆材料...
- RV減速器服役工況加速載荷譜編...
- 基于全息下三角矩陣變換對比的運...
- 基于關節扭矩平衡的機器人末端負...
- 一種新型負壓式爬壁機器人吸附特...
- 風電設備情境知識圖譜構建技術研...
- 基于有限元模擬的螺栓退刀槽滾壓...
- 輪轂毛刺機器人打磨刀路規劃與工...
- 基于局部線性嵌人的制造過程多重...
- 基于多元?jiǎng)右蝌?qū)動的中藥制藥車間...
- 基于多源信息融合和集成學習的薄...
- 基于拆卸信息提取的多零件堆疊結...
- 考慮同軸度的汽車發動機曲軸孔鏜...
- 基于缸徑與流量匹配的高空作業平...
- 硬質合金刀具增材制造技術發展趨...
- 固溶處理對鍛/增復合成形TC4...
- 基于混合遺傳蟻群優化隨機森林算...
- 玻纖質量分?jǐn)?shù)對長玻纖增強聚丙烯...
- 復雜形狀零件單點漸進液壓成形厚...
- 帶鋼平整過程中C翹機理及治理策...
- 正壓防護服用供氣背包設計及其數...
- 基于特征模型和跟蹤微分器的主動...
- 挖掘機工作過程動力特性仿真及主...
- 基于混雜模型預測控制的順序?qū)崟r(shí)...
- 《面向2035特種加工技術路線...