正壓防護服用供氣背包設計及其數值模擬與實驗
中圖分類號:TP202 DOI:10.3969/j.issn.1004-132X.2025.06.023 開放科學(資源服務)標識碼(OSID):
Design and Numerical Simulation and Experiments of Gas Supply Backpacks for Positive Pressure Protective Clothing
HOU Yulei1 LI Ximeng1SUO Huai2LI YuelZENG Daxing' * 1.School of Mechanical Engineering,Yanshan University,Qinhuangdao,Hebei, 2.Qinhuangdao Gaha Medical Electronic Instrument Co.,Ltd.,Qinhuangdao,Hebei, 3.School of Mechanical Engineering,Dongguan University of Technology,Dongguan, Guangdong,
Abstract:At present,the function of positive pressure protective clothing is relatively single,the high internal temperature and difficult pressure control resulted in low safety and comfort. Therefore, a supporting device integrating supply/exhaust, filtration and cooling functions was proposed. The data required to maintain a slightly positive pressure state within the protective clothing was tested,and the structure of the air-supply backpack was designed in modules. A heat transfer analysis was conducted on the semiconductor refrigeration module,and a simulation model was established to analyze the impacts of profile dimensions on refrigeration performance based on CFD (computational fluid dynamics). The parameters of temperature and pressure were stabilized by fuzzy PID control,the transfer function was solved,the controller was designed and verified by Simulink simulation. The FLUENT simulation model of micro positive pressure protective clothing was built to analyze the distribution law of flow field and temperature field in protective clothing and the influences of air supply temperature. The prototype of air supply backpacks was developed and the temperature and humidity of protective clothing were tested. The results show that the air supply backpacks may dehumidify to normal ambient humidity within 3O s and reduce 5°C compared with room temperature within 100s
Key words: positive pressure protective clothing; gas supply backpack; semiconductor refrigera-tion;FLUENT simulation; temperature and humidity testing
0 引言
防護服是各種污染環境中進行檢測、救援等任務的基本防護裝備,但目前傳染病防控及生化實驗室人員所用防護裝備生理舒適性較差[1],正壓防護服若在保證用戶安全的同時能夠為其提供潔凈空氣,并持續排出身體熱量和產生的濁氣,則可有效提高穿戴的舒適性[2]。(剩余17116字)
- 考慮分布和傳遞模型的機械系統可...
- 中間相炭微球對多層釬焊金剛石砂...
- 固結與游離磨粒協同作用硬脆材料...
- RV減速器服役工況加速載荷譜編...
- 基于全息下三角矩陣變換對比的運...
- 基于關節扭矩平衡的機器人末端負...
- 一種新型負壓式爬壁機器人吸附特...
- 風電設備情境知識圖譜構建技術研...
- 基于有限元模擬的螺栓退刀槽滾壓...
- 輪轂毛刺機器人打磨刀路規劃與工...
- 基于局部線性嵌人的制造過程多重...
- 基于多元動因驅動的中藥制藥車間...
- 基于多源信息融合和集成學習的薄...
- 基于拆卸信息提取的多零件堆疊結...
- 考慮同軸度的汽車發動機曲軸孔鏜...
- 基于缸徑與流量匹配的高空作業平...
- 硬質合金刀具增材制造技術發展趨...
- 固溶處理對鍛/增復合成形TC4...
- 基于混合遺傳蟻群優化隨機森林算...
- 玻纖質量分數對長玻纖增強聚丙烯...
- 復雜形狀零件單點漸進液壓成形厚...
- 帶鋼平整過程中C翹機理及治理策...
- 正壓防護服用供氣背包設計及其數...
- 基于特征模型和跟蹤微分器的主動...
- 挖掘機工作過程動力特性仿真及主...
- 基于混雜模型預測控制的順序實時...
- 《面向2035特種加工技術路線...