考慮同軸度的汽車發動機曲軸孔鏜削工藝參數節能優化

打開文本圖片集

中圖分類號：TH161DOI：10.3969/j.issn.1004-132X.2025.06.015 開放科學（資源服務）標識碼（OSID）：

Processing Parameter Energy-saving Optimization for Boring Automobile Engine Crankshaft Holes Considering Coaxiality

ZHANG Dengyong LI Congbo* WU Shaoqing ZHANG You LI Chengyuan State Key Laboratory of Mechanical Transmission for Advanced Equipment，Chongqing University， Chongqing，400044

Abstract： To address the issues of the coaxiality value of the automobile engine crankshaft holes was too large or even out of tolerance after boring，and the low energy eficiency of boring processes， a study of processing parameter energy-saving optimization for boring automobile engine crankshaft holes was conducted considering coaxiality. The influencing factors of coaxiality in boring crankshaft holes were analyzed and the coaxiality value prediction models were established based on the finite element methods and support vector machine regression algorithms. Then，the energy consumption characteristics of boring crankshaft holes were analyzed，and a boring parameter optimization model was established aiming at specific energy and maximum coaxiality value. The improved multi-objective dragonfly algorithm was used to solve the model and the optimal combination of processing parameters to balance energy eficiency and coaxiality was determined. Finally，the case study indicates that after the optimization，the maximum coaxiality value is reduced by 10.81% ，and the specific energy is reduced by 4.61% ，which verifies the effectiveness of the optimization model.

Key words： automobile engine crankshaft hole;coaxiality； energy-saving optimization； processing parameter；boring

0 引言

汽車發動機曲軸孔作為發動機的核心關鍵部件及曲軸的唯一承載體，其加工精度很大程度上決定著發動機的性能和使用壽命，因此，實際生產中對曲軸孔的精度要求很高。（剩余15255字）