電動剃須刀外殼注塑模的設計

打開文本圖片集

Design of injection mold for electric razor case

REN Tianjuan

（Shaanxi Institute of Technology，Xi'an 71O3O2， Shaanxi，China）

Abstract： This paper takes the electric razor shell plastic parts as the research object， according to the moulding difficulties of the plastic parts， the mould is designed with a latent gate to ensure the surface quality of the plastic parts; in order to ensure that the plastic parts side holes， diagonal holes and snap mechanism molding were designed for the core extraction mechanism of the fixed and moving moulds;and at the same time，a fixed-pitch parting mechanism is designed to ensure that the moulds three times the parting and the smooth release of the mould，the structural design of this injection mould is reasonable，and it can provide a certain reference for the moulding of the same kind of shells and plastic parts. The structural design of the injection mould is reasonable，and it can provide certain reference for the moulding of similar plastic parts of shells.

Key words： injection mold; constant-mode core puling; lateral core pulling; triple staging

0 引言

電動剃須刀外殼類產品大多是規則形狀，通常都有側孔、斜孔和卡扣機構，為保證塑件的順利脫模，需要設計相應的弧抽芯機構。（剩余3492字）