SCR脫硝分區噴氨影響因子研究及優化

打開文本圖片集

摘  要：近年來，針對SCR脫硝系統過量噴氨和氨逃逸等問題，分區噴氨控制技術開始在燃煤電廠進行應用。該文采用數值模擬方法（CFD）對某600 MW機組的SCR分區噴氨系統進行流場模擬，并提出優化方案，優化后催化劑入口氨氮比和噴氨分區對應性顯著改善，最后分析不同負荷工況對流場的影響。

關鍵詞：CFD；分區噴氨；流場優化；分區影響因子；選擇性催化還原

中圖分類號：X773       文獻標志碼：A          文章編號：2095-2945（2024）14-0120-04

Abstract： In recent years， aiming at issues such as excessive ammonia injection and ammonia escape in SCR denitrification systems， partitioned ammonia injection control technology has begun to be applied in coal-fired power plants. This article uses a numerical simulation method， Computational Fluid Dynamics （CFD）， to simulate the flow field of the SCR zoned ammonia injection system of a 600 MW unit， and proposes an optimization plan. After optimization， the catalyst inlet ammonia nitrogen ratio and the correspondence between the ammonia injection zones are significantly improved. Finally， the impact of different load conditions on the flow field was analyzed.

Keywords： CFD; zoned ammonia injection; flow field optimization; zonedimpact factor; selective catalytic reduction （SCR）

選擇性催化還原（SCR）煙氣脫硝技術作為一種主要的高效NOx控制技術，廣泛應用于國內燃煤發電機組，使出口NOx濃度達到超低排放要求[1-3]。（剩余3605字）