預裂爆破切頂卸壓技術及切頂參數合理選取研究
中圖分類號:TD322 文獻標志碼:A 文章編號:1003-5168(2025)07-0034-05
DOI:10.19968/j.cnki.hnkj.1003-5168.2025.07.007
Top Cutting and Pressure Relief Technology of Pre-fracturing Blasting and Reasonable Selection of Top Cutting Parameters
HE Haoda'LOU Peijie12 (1.School of Civil Engineeringand Construction,Anhui Universityof Technology,Huainan 232Oo1,China; 2.State KeyLaboratory for Fine Exploration and Intelligent Development of Coal Resources, China University of Mining and Technology,Xuzhou 221116,China)
Abstract:[Purposes] This study aims to address the issue of the 131105 working face mining affecting the use of the central roadway in a coal mine,by using pre-fracturing blasting technology to cut off the stress from the mined area and transfer it to the mined area sideways,thus ensuring the normal use of the central roadway.The optimal parameters for cuting-top relief are proposed to achieve the best relief effect.[Methods] This study analyzes the cuting-top relief mechanismand derives the basic scheme for cutting-top relief through theoretical analysis and engineering analogy.The analysis is conducted using the FLAC3D software at different heights and angles to obtain the optimal cutting-top height and angle,
thereby verifying the rationality of the basic scheme.[Findings] The study shows that the cutting-top angle should not be too large nor too small,with the optimal angle being .As the cutting-top height increases,the degree of stress concentration on the side of the mined area gradually decreases.When the cutting-top height exceeds 2 5 m ,the degree of stress concentration changes litle. Ultimately,a cuttingtop height of 2 5 m is chosen.[Conclusions] By pre-fracturing blasting on the side of the working face and selecting reasonable cutting-top parameters,it is possble to effectively cut off the stress transfer from the hard roof and reduce the peak support pressure, thereby achieving the goal of protecting the side roadway,which providesreferenceand guidance forsimilarmines.
Keywords:mining influence; pre-fracturing blasting; cuting top and relieving pressure; FLAC ; numerical simulation
0 引言
隨著我國煤礦開采強度和深度的增加,地應力、采動應力影響范圍、應力集中系數逐漸增大,加之巷道圍巖力學性質的惡化,巷道變形愈發劇烈[]。(剩余4891字)
- 新物質形態“時間準晶體”面世...
- 科學家觀察到DNA開始解旋瞬間...
- 聲子極化激元電激發首次實現...
- 新型光電子芯片能效和帶寬創紀錄...
- 二硒化鈮薄膜中發現隱形超導態...
- 新器件實現“藍色能源”高效轉換...
- 智能熱網系統在某智慧電廠中的應...
- 一種金融系統的混沌機理分析及有...
- 民航通信導航監視系統可靠性提升...
- 夾套弧板結構設計及Creo有限...
- 一種新型棒狀物料卸盤裝置的設計...
- 同軸直旋混合射流噴嘴結構參數優...
- 預裂爆破切頂卸壓技術及切頂參數...
- 考慮庫水位波動和暴雨影響的滑坡...
- 江西桃源金礦1:1萬土壤剖面采...
- 基于HEC-HMS模型的小流域...
- 城鄉供水一體化的現狀探討與熱點...
- 正棱柱斜拉索風雨激振模型減振效...
- 復合型鐵路瓦斯隧道通風流場及瓦...
- 2 0 0 m 級預應力混凝土...
- 基于綠色溶劑的鈣鈦礦薄膜一步法...
- 固體廢棄物無害化處理技術的創新...
- 高爐煤氣流分布及組分預測研究...
- 縣域農業-城鎮-生態空間整治潛...
- 基于PLUS與InVEST模型...
- 江西省2000—2018年森林...
- 西部典型寒旱區某鐵礦排土場生態...
- 定邊油田羅龐塬地區長7段頁巖油...
- 跨境數字知識產權爭議在線調解機...
- 人工智能生成內容的著作權法保護...
- 知識產權助力河南省主導產業創新...
- 艾拉司群的專利技術分析...
- 長江經濟帶數字技術創新水平測度...
- 數字化轉型下河南省智慧農業發展...
- 河南省智慧文旅產業現狀及高質量...