基于AMESim的液力驅動無桿采油系統運行規律研究
中圖分類號:TE355 文獻標識碼:A DOI:10.12473/CPM.202404036
Liu Yang,Qian Qin,Zhi Qingong,et al.Researchon the operation lawof hydraulicall-driven rodless oil production systembased on AMESim [J]. China Petroleum Machinery,2025,53(5):86-93.
Research on the Operation Law of Hydraulically-Driven Rodless Oil Production System Based on AMESim
Liu Yang'Qian Qin2Zhi Qingong2Zhu Zejun2Yan Tingjun’Chu Zhangsen'Huang Tingwei1 (1.Beijing UniverstyofChemicalTechnology;2.PetroleumEnginering TechnologyResearch Institute,Sinopec ShengliOifeld Company)
Abstract: There are few reports on the dynamic properties of hydraulically-driven rodless oil production systemsand the motion law of downhole power cylinders.In this paper,a simulation model of the hydraulicall-driven rodless oil production system was built using AMESim to obtain the operating presure curve of the system and thedisplacement and velocitycurves of the downhole power cylinder piston under diferent viscosities and bulk elastic moduli of the power fluid,and clarifythe motion lawof the downhole power cylinder.The resultsshow that during the operating cycle of the downhole power cylinder,most of the time is used to complete the energy accumulation of the power cylinder and fillthe compressed power fluid volume.To increase the frequency of stroke of the downhole unit,the input flow rate needs to be increased.As the viscosityof the power fluid increases and the bulk elastic modulus decreases,the operating cycle of the downhole power cylinder increases,and the system effciency decreases,so it is recommended to choosea fluid with low viscosityand high elastic modulus as the power fluid of the system.The research conclusions provide a reference for the design of hydraulicall-driven rodless oil production system and a theoretical guidance for field application of the system.
Keywords:hydraulically-driven rodless oil production system;AMESim simulation model; influential factors;downhole power cylinder; power fluid
0引言
隨著油田進一步開發,大斜度井、定向井越來越多,有桿抽油系統出現管桿偏磨現象越來越嚴重[-2]。(剩余11132字)
- 機理-數據融合的造斜率智能預測...
- 基于Blending模型融合的...
- 基于聲波處理技術的鉆井環空動液...
- 川西深層致密砂巖水平井鉆井提速...
- “璇璣” 導向工具與底部鉆具組...
- 立輪輔助鉆進單元試驗與數值模擬...
- 裸眼沖探PDC鉆頭設計與鉆進仿...
- 東海西湖區塊深部地層復合沖擊破...
- 基于石墨烯導熱工具的隨鉆儀器溫...
- 大環空坐封用可溶橋塞錨定結構優...
- 基于AMESim的液力驅動無桿...
- 多級壓裂斜井段累積塑性應變數值...
- 基于EMD小波降噪的螺桿泵共振...
- 考慮耦合效應的頁巖油井筒溫壓分...
- 復合式三相旋流分離器分離性能分...
- 基于響應面法的小型井下油水分離...
- 超高壓尾管回接壓裂工藝在塔里木...
- 基于RGPSO-LightGB...