激光熔覆光斑尺寸對鐵基涂層的組織與性能影響研究

打開文本圖片集

中圖分類號：TG174 文獻標志碼：A

Effect of laser cladding spot size on microstructure and properties of iron-based coatings

LUO Gang'，DU Shangzhe3，ZHANG Zhenlin2，LIU Zongyi' ， ZHANG Yihai' ，LIU Changqing3， SUN Junhao *

（1.Push Mold Co. Ltd.，Yibin 644OO7，Sichuan，China; 2. High-end Equipment Advanced Materials and Manufacturing Technology Laboratory，Chengdu 61oo31，Sichuan China;3.SJTU-Yibin Innovation Center for Advanced Materials，Sichuan，Yibin 644OOo，Sichuan China）

Abstract：Three types of iron-based alloy coatings were prepared on the surface of 45 steel by laser cladding technology with varying spot sizes. The effects of spot sizes on the phase composition， microstructure， microhardness， and wear resistance of the coatings were studied. The results show that coatings with different spot sizes can be successfully produced within an optimized process range. The three iron-based alloy coatings are primarily composed of body-centered cubic α-Fe and Fe-Cr（Ni） solid solutions，with spot size having a minimal effect on the phase composition. Compared to the coatings produced with larger spot sizes （L1-L3），those with smaller spot sizes （S1-S3）exhibit a finer microstructure. The hardness of all three types of iron-based alloy coatings is over 2. 5 times greater than that of the substrate，with the small spot coatings showing superior hardness compared to the large spot coatings. In terms of wear resistance， all coatings demonstrate a reduction in wear volume by more than 70% compared to the substrate. Specifically， the wear volume and friction coefficient of the large-spot laser cladding coatings are higher than those of the small-spot coatings. The coating S3 exhibits the best wear resistance，with a wear volume reduction of 97.7% compared to the substrate and a friction coefficient of only 65% of that of the substrate.

Key words：spot size； laser welding;microstructure; microhardness;wear resistance

0 引言

45鋼作為優(yōu)質碳結構鋼，廣泛應用在機械零部件中。（剩余9250字）