基于LFT-D復合材料的建筑模具成型優化研究
中圖分類號:TP089 文獻標志碼:A
Optimization of the forming process of architectural molds based onLFT-D compositematerials
QIUShixiong,CHENGLianji,QIUWei,LIHengbin,DUWenyou (Southwest Communications Construction Group Co. Ltd.,Kunming 65O5Oo,Yunnan China)
Abstract: The stability of construction projects directly affects the overall quality of the project. In order to improve the stability of the construction project structure, this paper takes the construction formwork as the research object and uses PA6+GF30% LFT -D composite material to design the mold structure and cooling system. By analyzing the diameter of the cooling pipe,calculating the cooling time and the distance between the pipe and the cavity surface,the mold process parameters are optimized. The results show that the process parameter combination of mold temperature 45°C ,melt temperature 215°C ,injection time 8s ,holding time 1O seconds and holding pressure 80MPa is the optimal solution. In the solid contact surface, the heat exchange of the cooling solid contact surface shows a downward trend,and the higher the coolant fluid temperature, the lower the heat exchange. In the liquid-solid contact surface,with the increase of the coolant temperature,the heat exchange gradually decreases,and when the coolant temperature is 40°C ,the heat exchange shows a slow upward trend. In addition,the tensile strength, bending strength and impact toughness of the mold casting are 203MPa , 269MPa and 32.5kJ/m-2 ,respectively. In the casting procedure,the pouring time,shear rate and filling rate were 8.74s , 4×105s-1 and 98.44% respectively. The optimized mold forming process showed the best effect.
Key words: building engineering structure; LFT-D composite material; material mold; mold forming; process optimization
0 引言
隨著社會經濟的快速發展,建筑行業對質量、效率以及可持續發展的要求不斷提高。(剩余11965字)
- 復合材料葉片鋪層形狀設計...
- 基于ANSYS的超聲振動輔助無...
- 錐形塑料保持架仿真模擬優化及模...
- 基于CAE分析的汽車塑料飾件模...
- BIM技術在建筑模具設計與制造...
- 交通工程用復合材料模具設計與制...
- 反壓注塑發泡成型模具優化設計...
- Ti6554合金鑄錠擠壓工藝研...
- 基于工程力學的模具結構優化設計...
- 誘導輪成型加工工藝研究...
- 一種用雙層凹模補償U(kuò)形彎曲回彈...
- 基于有限元仿真的鋁合金輪轂擠壓...
- 鋁合金擴散連接技術與界面質量調...
- 基于LFT-D復合材料的建筑模...
- 動態載荷下三種典型模具鋼材料的...
- 銅納米顆粒改善潤滑摩擦特性在注...
- 激光熔覆光斑尺寸對鐵基涂層的組...
- 噴射沉積超高強鋁合金成分篩選與...