旋進旋渦流量計取壓方式對測量結果的影響

打開文本圖片集

【摘要】本文采用負壓法音速噴嘴氣體流量標準裝置，分析研究了旋進旋渦流量計不同取壓方式對測量結果的影響。研究結果表明，表體取壓壓損最小且表體取壓方式的線性度優于表前取壓和表后取壓。

【關鍵詞】旋進旋渦流量計；表體取壓；表前取壓；表后取壓

【DOI編碼】10.3969/j.issn.1674-4977.2024.02.060

Influence of Pressure Taking Mode of Vortex Precession Flowmeter on Measurement Results

FAN Zhenxing

（Henan Institute of Metrology， Zhengzhou 450008， China）

Abstract： This article uses a negative pressure sonic nozzle gas flow standard device to study the influence of different pressure tapping methods on the measurement results of the vortex precession flowmeter. The research results indicate that the pressure tapping at the meter body has the least pressure loss and the linearity of the pressure tapping at the meter body is better than the pressure tapping at the upstream and downstream positions of the meter.

Keywords： vortex precession flowmeter； surface body pressure； take pressure before the table； take the pressure behind the meter

0引言

旋進旋渦流量計采用先進的微處理技術，具有功能強大、流量范圍廣、操作維修簡單、安裝使用方便等優點。（剩余2405字）