小口徑彈體淬火冷卻硬度分布不均勻分析

打開文本圖片集

摘要：小口徑彈體用鋼消耗量大，硬度均勻性要求高，常規淬火處理后經常出現硬度偏低和波動性大的問題，不但影響了彈體的打擊能力，而且增加了生產成本。經過理論分析，確定了常規淬火硬度偏低和波動性大的原因，提出了淬火改進措施。試驗結果顯示：改進淬火處理后硬度和波動性均得到了改善，達到彈體的技術要求。

關鍵詞：小口徑彈體；T12A鋼；硬度；淬火冷卻

Discussion of hardness uneven of small bullet steel during quenching process

TAN Qiuyun1， WANG Xiaoping1， SUN Guojin2

1. Changsha Sunray Heat Treatment Co.，  Ltd.， Changsha 410323， Hunan， China

2. School of Materials Science and Engineering， Henan Institute of Technology，  Xinxiang 453003， Henan， China

Abstract： The phenomenon of low and uneven hardness of small bullet steel offen occurs after normal heat treatment which affect the strike and productive capacity. The reason for the low and uneven of hardness are discussed and the improving processes are posed here. Results show that after modified quenching process the hardness were improved and the variations were decreased which meet the technical requirements of bullet steel.

Keywords： small bullet steel; T12A steel; hardness; quenching process

1 序言

輕武器如步槍、機槍、沖鋒槍等，具有質量輕、機動性強等特點，是各兵種常規裝備武器之一[1-3]。（剩余2930字）