鋼橋焊接接頭強韌匹配現狀分析
摘要:綜述了國內鋼橋焊接接頭強韌性匹配情況。鋼板及焊接材料試驗數據表明:原材料的強度波動范圍較大,給強度匹配帶來較大的難度,需要在原材料標準中對其強度范圍進行限制;某些項目規定的焊縫強度限制指標缺乏理論依據,需要進行專題研究制定合理的波動范圍。
關鍵詞:鋼橋;焊接接頭;強韌匹配
Analysis of strength and toughness matching status of welded joints of steel bridges
ZHANG Jianfeng, LI Junping, PEI Xuefeng
China Railway Baoji Bridge Group Co., Ltd., Baoji 721006, Shanxi, China
Abstract: The domestic steel bridge welded joint strength and toughness matching is reviewed. Steel plate and welding material test data show that: the range of raw materials fluctuation strength is large, bringing greater difficulties to strength match. Therefore, limitations on strength range is needed in raw material standerds; In some programs, the weld seam strength limitation index lack of theoretical basis. There is a need for thematic research to develop a reasonable range of fluctuations based on each cases.
Keywords: steel bridge; welded joint; strength and toughness matching
1 序言
橋梁是互聯互通的關鍵節點和樞紐工程,其破壞事故將造成嚴重的社會影響。(剩余4975字)
- 玻璃材料超短脈沖激光焊接機理及...
- 焊縫質量離線檢測技術的研究現狀...
- 變厚截面材料激光穿透焊接自適應...
- 基于焊接變形控制的筒體結構及焊...
- 激光焊焊接速度對DC06超深沖...
- T形接頭焊接過程的數值模擬...
- 不同Y形環應用于核電站控制棒驅...
- 鋼橋焊接接頭強韌匹配現狀分析...
- 無損檢測用焊縫試板裂紋缺陷制備...
- 鈦合金葉片阻尼臺堆焊層鑄造碳化...
- 工藝管道預制中細絲埋弧焊工藝研...
- 20鋼熔化襯墊自動焊工藝研究及...
- 基于熔池特征的激光填絲焊熔透預...
- 小口徑彈體淬火冷卻硬度分布不均...
- 稀土元素對超級鐵素體不銹鋼組織...
- 不同固溶處理工藝對N08120...
- 傳動齒輪失效分析...
- 熱處理爐爐溫均勻性和系統精度檢...
- 船用低速柴油機十字頭表面感應淬...
- 負曲率凸輪軸中頻感應淬火工藝研...
- 基于Ansys Additiv...
- 激光選區熔化TA15材料缺陷分...