基于影像測量的三等標準金屬線紋尺檢定不確定度評定
摘要:以激光干涉儀為主標準器,結合顯微鏡瞄準和CCD影像采集裝置檢定三等金屬線紋尺的實際長度,已成為目前常用的檢定方法。文中從多個方面分析該方法檢定三等金屬線紋尺實際長度的測量不確定度來源,得到滿足要求的評定結果。
關鍵詞:影像測量;三等標準金屬線紋尺;不確定度評定;激光干涉儀
Uncertainty Evaluation for the Grade Ⅲ Standard Metallic Scale Verification Based on Imaging Measurements
LI Qiaoli
( Fujian Metrology Institute, Fuzhou 350003, Fujian, China )
Abstract: It is currently the commonly utilized calibration methodology that employs the laser interferometer as the main standard, combining with microscope aiming and CCD image acquisition device, to verify the actual length of the grade Ⅲ standard metallic scale. The source of the measurement uncertainty in the actual length of the grade Ⅲ standard metallic scale verified by this method is analyzed from many aspects, and the evaluation results that meet the requirements are obtained.
Key Words: Imaging measurements; GradeⅢstandard metallic scale; Uncertainty evaluation; Laser interferometer
0 引言
三等標準金屬線紋尺(以下簡稱“三等線紋尺”)多用于檢定水準標尺、鋼直尺及其他線紋尺,其材質主要有鋅白銅、不銹鋼和黃銅等[1],外形結構見圖1。(剩余2973字)
- 基于影像測量的三等標準金屬線紋...
- EOEG裝置第四效蒸發器C53...
- 掃描電鏡示值誤差測量不確定度評...
- 基于定期檢驗的叉車制動距離測定...
- 絕緣子抽檢質量分析與改進對策研...
- 基于RGB顏色分析的電梯層門腐...
- 曳引電梯對重反繩輪失效案例分析...
- 一起電梯蹲底故障的原因分析及對...
- 不同消解方式對原子吸收分光光度...
- 高度卡尺自動檢定儀關鍵參數設計...
- 新《交流接觸器能源效率標識認證...
- 海洋大數據標準化現狀與對策研究...
- 海峽兩岸(閩臺)香(品)標準的...
- 郵政快遞業綠色網點標準化建設研...
- 基于專家打分法的質量安全風險評...
- 智能電能表軟件功能的復合評測方...
- 檢驗檢測機構科技成果轉化信息管...
- 毛細管粘度計檢定裝置的研制及常...
- 紡織服裝行業貿易摩擦案件現狀及...
- 基于層次分析法的橋式起重機評估...
- 鋼筋在氯離子環境中腐蝕試驗方法...
- 檢驗檢測機構數字化監管方式探索...