特大斷面公路隧道圍巖變形分析及支護優化研究
中圖分類號:TQ178;U455.4 文獻標志碼:A 文章編號:1001-5922(2025)07-0168-04
Abstract:Inorder toexplore theinfluenceof the thicknessof theinitial supportshotcreteonthe stressanddeformationof the surrounding rock in tunnel construction,taking the Maanshan Tunnel from Deyang to Chengdusection of the Beijing-Kunming Expresswayasan example,F(xiàn)LAC 3D software was used to establish a three-dimensional solid modelof the tunnel with differentinitial support shotcrete thicknesses for numerical simulation,andthecalculated values were compared with theon-site monitoring data,and the stress and deformation laws of the surounding rock after the supportof different shotcrete thickneses were discussed.The results showed thatthe thicknessof shotcrete increased from 10 cm to 15,20 and 25 cm,and the surface deformation decreased by 4.14% , 2.13% and 0.85% , respectively,and the deformation of the vault decreased by 3.84%, 1.92% and 0.94% ,respectively.When the spray thickness was 20cm ,the deformation amplitude of the vault tent to be stable,and when the spray thickness increased from 20 cm to 25cm ,the confining pressure support stress was weakened,and the spraying thickness of 20cm was the optimal scheme and more economical.The comparison between the numerical simulation and the onsite monitoring data showed thatthe numerical calculated value was large and close to the measured data,and the prediction accuracy met the requirements of the guided construction.This case can provide reference experience for the implementation of numerical simulation,monitoring and measurement of similar tunnels in the future.
Key words:highway tunnel; surrounding rock deformation; initial support;;shotcrete;numerical simulation;monitoring and measurement
隨著國內汽車工業的發展,許多地區的城市主干線、城市快速路、國道主干線繞城段交通量增長迅速,8車道快速路擴建工程和4車道變8車道(4改8)擴建工程在一些地區已經開始動工。(剩余4804字)
- 口腔修復自粘接樹脂水門汀剪切粘...
- 基于極限制造的方殼鋰電池裝配段...
- 民用建筑樓板與梁粘合結構設計優...
- 數值模擬聚氨酯碎石層防治路基翻...
- 一種新超低模量硅酮密封膠制備及...
- 桁架結構中復合材料膠接區域膠層...
- 鐵路橋梁加固用改性環氧樹脂膠粘...
- 公路擴建拼接部位用環氧樹脂膠粘...
- 大型風電機組葉輪裂紋焊接圖像檢...
- 軌道交通供電設備用膠粘劑強度和...
- 一種紙質檔案裝訂用水性膠粘新材...
- 高海拔輸變電工程防滲用的新型聚...
- 基于絮凝沉降結合技術的水利水電...
- 基于三維激光掃描的外墻快速檢測...
- 3D打印快速手板制作用膠粘劑制...
- 裝配式建筑用的4種纖維復材制備...
- 基于低應變檢測法的缺陷樁基動力...
- 考慮微觀形貌的納米填料增強瀝青...
- 不同碳纖維復合材料在水利工程中...
- 桿塔混凝土接地用新型無腐蝕導電...
- 電力施工擾動區域土壤理化特性的...
- 混凝土結構水渠病害機理分析及新...
- 改性透明聚氨酯呼吸面罩氣密性測...
- 一種沉積Ag涂層新型鈦合金骨外...
- 新型感濕材料與傳感技術在光伏電...
- 有機高分子聚合物PAM在足球場...
- 大體積混凝土水化傳熱理論及溫度...
- 基于混沌時域反射技術的絕緣材料...
- 一種吸附重金屬鉻的改性復合材料...
- 燃煤鍋爐還原區 H2S 生成模...
- 智能海水懸浮物真空過濾系統設計...
- 基于綜合語義相似度的化工信息檢...
- 機器視覺技術在油氣儲運領域中的...
- 基于多源數據融合的天然氣站場設...
- 基于熱流固耦合的無油螺桿壓縮機...
- 面向數字化鐵路貨車檢修車間智能...
- 基于嵌入式Linux的血站多協...
- 基于RPA+AI的多目標自動化...
- 基于證據理論的智能變電站繼電保...
- 基于模糊決策樹數據挖掘算法的智...
- 基于胡克定律的有限土體 k 值...
- 隧道巖爆地質災害微震監測系統設...
- 基于K-means的機泵群SI...
- 特大斷面公路隧道圍巖變形分析及...
- 探究BIM在優化現代管網工程項...
- 倒塔作業桿塔與周邊建筑物實時動...
- 基于改進BP網絡的數字化智慧電...
- 基于數字攣生技術的變電站二次回...
- 基于業務驅動的變電站信息點表生...
- 一種適用電力系統的機器人流程自...
- 工業設備數據采集處理一體化平臺...