PCF8591工作原理及與單片機通信代碼設計

打開文本圖片集

摘  要：該文以STC15W1K24S單片機為核心控制器，分析PCF8591的工作原理，并以單片機采集氣敏傳感器的氣體濃度為例，設計一個氣體濃度監測自動控制系統，給出單片機和PCF8591之間通信的代碼。設計代碼在實際設備上經過驗證，可以正確采集到氣敏傳感器的氣體濃度。

關鍵詞：PCF8591;通信;代碼設計;STC15W1K24S單片機;傳感器

中圖分類號：TN911      文獻標志碼：A          文章編號：2095-2945（2024）26-0125-04

Abstract： In this paper， taking STC15W1K24S single chip microcomputer as the core controller， the working principle of PCF8591 is analyzed;with the gas concentration of gas sensor collected by single chip microcomputer as an example， an automatic control system for gas concentration monitoring is designed; and the communication code between single chip microcomputer and PCF8591 is given. The design code has been verified in the actual equipment， and the gas concentration of the gas sensor can be collected correctly.

Keywords： PCF8591; communication; code design; STC15W1K24S single chip microcomputer; sensor

PCF8591是一個單片集成、單獨供電、低功耗和8位的互補金屬氧化物半導體（CMOS）數據轉換器件，廣泛使用在需要進行A/D轉換的場合。（剩余4649字）