面向柔性鉗位型尺致動器提速驅動的協同切換控制
Collaborative switching control for improved-speed driving of flexible clamp-type inchworm actuator
MENG Lingchen 1,2 ,YAN Peng 1,2* , LIU Pengbo2, ZHANG Zhiming4
School ofMechanical Engineering, Shandong University, Jinan 25Oo61, China; 2. Key Laboratory ofHigh-efficiency and Clean Mechanical Manufacture of the Ministry of Education,Jinan 250061,China; 3.School ofMechanical Engineering,Qilu University of Technology (Shandong Academy ofSciences, Jinan 250353,China; 4. School ofMechanical and Electrical Engineering,Jining University,Qufu 273155,China) * Corresponding author, E -mail: yanpeng@sdu. edu. cn
Abstract: This study explores the clamping-driving coordination mechanism and control strategies for a flexible clamp-type inchworm actuator,introducing an innovative high-speed clamping switching method based on real-time clamping state information.By utilizing the parasitic motion characteristics of the flexible clamping mechanism,the proposed strategy minimizes clamping alternation time,thereby achieving higher driving speeds under identical design parameters. A static model of the parasitic motion of the clamping mechanism was first established based on the actuator's configuration and verified through simulations.The real-time clamping switching mechanism was subsequently analyzed,leading to the development of a driving strategy incorporating real-time clamping state feedback. An experimental setup was constructed to validate the theoretical model and simulation results. Experimental findings demonstrate that the proposed strategy reduces single-step switching time by 28% and increases continuous multi-step driving speed by 25% under the same design and driving voltage conditions. These results confirm the accuracy of the theoretical and simulation analyses within an acceptable margin of error. The proposed strategy significantly reduces the single-cycle operating time of the inchworm actuator,enabling continuous and stable actuation while substantially enhancing driving performance.
Key words : flexible mechanism; inchworm actuator; parasitic movement; collaborative switching control
1引言
壓電致動器憑借定位精度高、響應速度快、體積緊湊以及與非磁性和真空環境兼容等顯著優勢,在集成電路制造、精密光學儀器和生物醫學等領域應用廣泛[1-3]。(剩余12894字)
-
-
- 光學精密工程
- 2025年01期
- 基于反格雷碼輔助相移法的高魯棒...
- 基于多位姿標靶的激光跟蹤姿態測...
- 膜厚監控系統準直聚焦耦合光路的...
- 基于雙投射結構光系統的多尺度點...
- 受激布里淵散射自調 Q 產生高...
- 網格激光高反抑制與中心提取誤差...
- 光纖準直非球面微透鏡陣列模壓成...
- 鎳渣改質及其在磁性復合流體拋光...
- 面向柔性鉗位型尺致動器提速驅動...
- 基于紋理奇異值分解的全參考圖像...
- 融合注意力機制的改進型Deep...
- 多模態語義交互的文本圖像超分辨...
- 條件擴散和多通道高低頻并行的紅...