近海漂浮垃圾收集器的設計與實現(xiàn)
打開文本圖片集
中圖分類號：TH122 文獻標志碼：A 文章編號： 1000-5013（2025）04-0386-07
Design and Implementation of Offshore Floating Garbage Collector
ZHU Laifa 1，2 ，TAN Zhongcheng1，JIN Huaxue 1 ， YANG Zhongying1，HE Longrong1，F(xiàn)AN Wei1
（1.College of Mechanical Engineering and Automation，Huaqiao University，Xiamen 361o21，China; 2.The Enginering Research Center for CAD/CAMof Fujian Universities （Putian University），Putian 3511oo，China）
Abstract：Based on the operational conditions of existing floating garbage collection devices，a design method for an offshore floating garbage collector was proposed by adopting a structure combining self-priming and reverse pushing.The self-priming function was applied to guide the floating debris into the colector，while the reverse pushing function was used to achieve high mobilityand motor multiplexing through diferential control， without compromising the self-priming function. A prototype was subsequently developed to verify the feasibilityof the proposed design. The results demonstrated that the colaborative operation of self-priming and reverse pushing could improve the collector's ability to handle floating garbage that is widely distributed and closely attached to the shore，thereby greatly improving collection efficiency. During the prototype testing，on the still water surface with a floating garbage density of approximately O.3 pieces per square meter，the average collection rate was 8 pieces per minute.
Keywords： offshore floating garbage;collector; self-priming function；reverse push function
近年來，海洋垃圾污染已成為國際廣泛討論的重大經(jīng)濟、政治、環(huán)境議題。（剩余6631字）