卡車制造端的CAN總線故障分析與排除(2)

打開文本圖片集

【摘  要】本文是《卡車制造端的CAN總線故障分析與排除》的第2篇。由于車輛CAN總線故障形式的復雜多變，加之不同車輛電控系統的差異配置，很難通過幾篇文章概括，因此本文承接上篇內容，繼續選取一些典型的卡車制造階段的CAN總線故障加以探討和學習。

【關鍵詞】CAN總線;電氣故障;分析方法

中圖分類號：U463.6    文獻標志碼：B    文章編號：1003-8639（ 2023 ）05-0089-03

【Abstract】This paper is the second part of the“CAN-bus fault analysis and disposal in truck manufacturing”，due to the complex and changeable fault forms of CAN-bus and the different configurations of electronic control systems on vehicles，it is difficult to summarize through several articles. Therefore，this paper continues the previous content and select some typical CAN-bus faults in the truck manufacturing stage for discussion and learning.

【Key words】CAN-bus;electrical fault;analytical method

作者簡介

王鵬理（1987—），男，工程師，主要從事汽車電氣工藝及檢測工作。（剩余5073字）