PDC鉆頭鉆除可鉆式套管橋塞技術分析
打開文本圖片集
摘 要：可鉆式橋塞鉆除工藝大部分以牙輪鉆頭為主，該文介紹南海東部某井采用PDC鉆頭進行橋塞鉆除作業過程。對PDC鉆頭鉆除橋塞的參數及后續發生問題進行分析，并對處理措施做一些對應性總結，希望為后續PDC鉆頭鉆除可鉆式橋塞作業提供一些參考依據。
關鍵詞：橋塞鉆除；PDC鉆頭；臨時棄井；高溫高壓；牙輪鉆頭
中圖分類號：TE921.1 文獻標志碼：A 文章編號：2095-2945（2023）14-0193-04
Abstract： The drilling technology of drillable bridge plug is mainly cone bit. This paper introduces the process of bridge plug drilling with PDC bit in a well in the east of South China Sea. This paper analyzes the parameters and subsequent problems of PDC bit drilling bridge plug， and provides some corresponding summary of treatment measures， hoping to provide some reference basis for follow-up drillable bridge plug removal operation of PDC bit.
Keywords： bridge plug drilling; PDC bit; temporary abandoned well; high temperature and high pressure; cone bit
隨著勘探事業的發展，近年來南海東部鉆遇高溫高壓井的數量增加，因受臺風、作業計劃變更的影響，需對高溫高壓井進行臨時棄井作業，增加了下橋塞的幾率，但是南海東部區域在使用PDC鉆頭鉆除橋塞技術這一塊基本是空白的，本文對該技術在南海東部某探井的使用進行歸納總結分析，為后續類似作業提供了參考借鑒的依據。（剩余4431字）