膨潤土加入量對粘土濕型砂性能影響的研究
Abstract: In the process of sand mixing,the effect of the effective bentonite content of recycled sand on the performance of molding sand was studied with the change of sand mixing time. At the same time,with the change of bentonite supplemental amount,the influence of supplemental amount on the properties of molding sand was studied.The results show that the properties of molding sand vary with the content of available bentonite in recycled sand and the amount of bentonite added during sand mixing.The study result provides a guiding basis for determining and selecting the effective bentonitecontent of recycled sandand the adition amount of bentonite in sand mixing.
Keywords: bentonite; addition amount; recycled sand; properties of molding sand
1序言
鑄造用膨潤土是一種主要以蒙脫石為礦物組分的非金屬物質,因其黏結力和可塑性強,脫膜性和透氣性好,以及濕態高溫條件下化學、物理性能穩定等特點,所以在各種化學黏結材料蓬勃發展的當下,仍是不可替代的造型原料。(剩余6771字)
- 7x×x 系鋁合金電...
- 二系鋁合金電弧增材制造技術研究...
- 輥壓機輥面堆焊區域的力學性能研...
- 原位熱軋和熱循環對電弧增材制造...
- 攪拌針形貌與旋向?qū)χ锌珍X型材F...
- 極寒地區S355ML鋼埋弧焊焊...
- 虛擬現實技術在焊接培訓領域的應...
- 汽車用5182-H111鋁合金...
- 介質長度對鋼軌-高錳鋼轍叉閃光...
- 焊接熱循環對18CrNiMo鋼...
- 回流時間對Sn0.3Ag0.7...
- 1mm不銹鋼波紋板與彎梁焊接工...
- 鋁合金激光角焊縫背部質量控制及...
- 雙絲埋弧焊免坡口免清根熔透工藝...
- 20CrMnTi鋼熱軋棒材鐵素...
- 大型環形薄壁鍛件調質工藝研究...
- 高壓渦輪葉片表面起皮故障分析...
- 基于JMatPro軟件的TA1...
- 主減速從動齒輪內孔的感應退火模...
- 熱處理工藝對軸承座力學性能的影...
- 膨潤土加入量對粘土濕型砂性能影...
- 中硅鉬鋸球墨鑄鐵排氣歧管研制與...
- 鎂合金鍛造工藝及性能提升研究...
- 汽車主減速器軸承早期卡滯失效原...
- 汽車后扭力梁開裂問題分析...