自動化控制系統在變電站智能調度中的應用研究
打開文本圖片集
[摘 要]文章以陜西某220 kV變電站為例，設計了適合該變電站的自動化控制系統，探究了自動化控制系統在變電站智能調度中的應用效果。研究結果表明，該系統中的光纖通信系統的數據延遲低于設計目標，差動保護裝置及過電流保護裝置的響應時間均優于設計要求，且調度效率與系統運行的可靠性大幅提升。
[關鍵詞]自動化控制系統；變電站；智能調度
[中圖分類號]TM621 [文獻標志碼]A [文章編號]2095–6487（2024）12–0013–03
Research on the Application of Automation Control System in Intelligent Dispatch of Substation
PAN Shuyang，ZHANG Xinyuan
[Abstract]The article takes a 220 kV substation in Shaanxi Province as an example to design an automation control system suitable for the substation and explore the application effect of the automation control system in intelligent dispatching of the substation. The research results indicate that the data delay of the fiber optic communication system in this system is lower than the design target， and the response time of the differential protection device and overcurrent protection device is better than the design requirements. Moreover， the scheduling efficiency and system operation reliability are greatly improved.
[Keywords]automation control system； substation； intelligent scheduling
1 工程概況
陜西省某220 kV變電站，總裝機容量為500 MVA，包含4臺主變壓器，每臺容量為125 MVA，主變壓器高壓側為220 kV，低壓側為110 kV和35 kV電壓等級。（剩余3586字）