滾珠絲杠滑塊運動控制研究
打開文本圖片集
[摘 要]基于以太網技術，采用羅克韋爾控制器和變頻器，CCW軟件編程，控制滾珠絲杠滑塊相對運動。通過更改比例系數、距離差值的區間和區間運行速度，絲杠滑塊以最快速度達到指定位置，誤差可在0.3 mm以內，實現絲杠滑塊快速精準停止。
[關鍵詞]滾珠絲杠;比例控制;相對運動;精準停止
[中圖分類號]TH87 [文獻標志碼]A [文章編號]2095–6487（2022）04–00–03
Research on Motion Control of Ball Screw Slider
Yang Feng，Li Wei-bin，Zhang Wen-ze，Ren Ya-li
[Abstract]Based on Ethernet technology， Rockwell controller and frequency converter， CCW software programming are used to control the relative movement of the ball screw slider. By changing the scale factor， the interval of distance difference and the interval running speed， the lead screw slider can reach the specified position at the fastest speed， and the error can be within 0.3mm， so that the lead screw slider can stop quickly and accurately.
[Keywords]ball screw; proportional control; relative motion; precise stop
滾珠絲杠是工具機械和精密機械上最常使用的傳動元件，其主要功能是將旋轉運動轉換成線性運動，或?qū)⑴ぞ剞D(zhuǎn)換成軸向反復作用力，兼具高精度、可逆性和高效率的特點。（剩余3144字）