基于MSC.Marc的車門密封條安裝間隙分析及優化

打開文本圖片集

摘 要：針對車門密封條在裝車過程中存在間隙問題，利用非線性有限元分析軟件MSC. Marc建立車門密封條三維仿真模型，分析車門密封條與車門鈑金安裝間隙的原因，并對車門鈑金安裝孔間距的進行優化，解決了車門密封條與車門鈑金安裝間隙問題。

關鍵詞：車門密封條 安裝間隙 有限元分析 優化

Abstract：Aiming at the installation clearance of door outer seal in the assembly process， the 3D simulation model was established by using MSC and Marc， the highly nonlinear analysis software. And its causes of the installation clearance between the door outer seal and the sheet metal were analyzed. And then through the optimization of the clearance between the installation holes， this clearance problem was solved.

Key words：door sealing， installation clearance， finite element analysis， optimization

車門密封條是安裝在車門鈑金上，在車門關閉時與車身側圍發生接觸變形，起到緩沖作用;同時阻隔車輛內部與外部空氣流通，起到防風、防塵、防水和隔聲等作用。（剩余1999字）